Wednesday, November 11, 2015

derp

I know I've said this before--please forgive the vent--but I just can't get over the sheer amount of derp in the manual safety design of the Benjamin Marauder*.  I keep thinking about the idea of building a "school set" of air rifles for students to learn on and train with, and the basic Marauder design (reliable boltie 10rd repeater, internally suppressed, adjustable power, hand-pump friendly PCP reservoir, topflight trigger, conspicuously accurate barrel) keeps coming up as being almost the obvious platform choice.  

But seriously...just look at this:

Yes, you can click to make it bigger, but why would you?


So...what you're saying is that in order to on-safe my loaded piece, I stick my finger inside the trigger guard and pull the lever to the rear.  


derp derp derp 

Look, I know I'm a pain in the ass about gun safety, and about gun safeties, and ergonomics in general...but at least there is a consistency to my own neuroses, and I'd like to think that a design like the above would have been laughed into oblivion before ever even coming up for serious approval, on the simple account of maybe, just maybe, the ergonomic action to make the loud noise and the ergonomic action to prevent the loud noise SHOULD NOT BE THE SAME.  But this damned thing actually made it out of committee and through legal!

The Garand safety is bad enough, but at least there you can say that the on-safe motion is outside the trigger guard.  This...I just don't know if I could ever see using it as a training tool--unless I just ignored the safety lever entirely as a...well, a safer option.  I still think that it wouldn't take too much effort to build a dogleg connector to a more ergonomic lever or button, and then the M-Rod would be nearly authentically there as a platform, lacking only iron sights, a short LOP, and if optics are important, a means of mounting an IER glass forward over the shroud.

Until then...well, I keep wondering how to turn a Benjamin Discovery into a repeater with sound suppression, or if it's possible to drop a Marauder pistol (which uses a simple trigger-blocking cross bolt safety...crude, but at least not idiotic) into a rifle stock.  

Grrr.  So close on the whole...and yet for training, so completely unusable.




___________________
* Not to pick on the M-Rod specifically;  the basic trigger group/safety design was around well before the Marauder was launched, and lots of airguns, especially spring-piston breakbarrels, use some variation of the damned thing.  (I suspect it is probably a very economical way to get a complete trigger/safety group into a stock with minimal cutting.)  I harp on the Marauder because it is such an otherwise outstanding piece of kit, that the derp hurts that much more.

1 comment:

MamaLiberty said...

You know what I think of manual "safeties" in general, but that one is truly an ND looking for a place to happen. The other day I actually saw a revolver with a manual "safety." Just shook my head and moved on. Absolutely nothing I need, or ever intend to mess with. The only safety for any gun I own is the space between my ears. :)